QT-6001S Servo carton compression tester 10KN is widely used in the inspection and analysis of product packaging materials in paper packaging production, household appliances, electronic products and other industries.
Product technical specification
Model：QT-6001S Servo carton compression tester 10KN
Product picture:(for reference only)
Product technical parameters：
1、The machine specification：
The machine adopts unique computer digital force, displacement and speed three closed-loop control in the test process, and cooperates with Taiwan motor and Taiwan delta frequency converter control system to realize the whole computer digital operation; It is widely used to test the physical properties of corrugated boxes and other packaging containers, such as compression, static pressure, edge pressure and stacking; The transmission system adopts Taiwan VGM worm gear reducer and Taiwan precision screw drive to achieve the best effect of transmission efficiency and sex noise ratio;
This machine is widely used in the inspection and analysis of product packaging materials in paper packaging production, household appliances, electronic products and other industries. It is an ideal testing equipment for scientific research institutes, colleges and universities, industrial enterprises, technical supervision, commodity inspection and arbitration departments.
2、Technical specifications：
1. Maximum test force: 10kN;
2. Accuracy grade of testing machine: 0.5;
3. Test force measurement range: 0.2% - 100% FS;
4. Relative error of test force indication: within ± 1% of indication;
5. Test power resolution: 1 / ± 300000 of the maximum test power (the whole process resolution remains unchanged);
6. Relative error of displacement indication: within ± 0.5% of the indication;
7. Displacement resolution: 0.003mm;
8. Force control rate adjustment range: 0.1-5% FS / S;
9. Relative error of force control rate: within ± 1% of the set value;
10. Adjustment range of beam speed: 0.5-500mm / min;
11. Relative error of beam speed: within 1% of the set value;
12. Control range of constant force, constant deformation and constant displacement: 0.5% - 100% FS;
13. Control accuracy of constant force, constant deformation and constant displacement: when the set value is less than 10% FS, it is within ± 1% of the set value; When the set value is ≥ 10% FS, it is within ± 0.1% of the set value;
14. Maximum stretching stroke: 1000mm;
15. Effective compressed space (clear space): 600mm;
16. Effective test width: 600 * 600mm;
17. Overall dimension of main engine (length) × wide × Height): 840 * 500 * 1650mm;
18. Power supply: 220V 50Hz 0.4KW;
19. Host weight: About 600kg.
3、Features of control and data processing system :
1.With advanced chipping technology and professionally designed data gathering and amplifying system，the tester is highly integrated，reliable and convenient. Control software automatically derives data of tensile strength, yield strength, fracture strength, modulus of elasticity, elongation. The open formula edition function allows automatic calculation of force, tension displacement deformation at any designated point. The standard in the process of control and data processing meet national requirement for testing metallic material and non-metallic material.
2、Control method: fixed speed, fixed displacement, fixed loading, fixed load increasing rate，fixed tension, fixed tension increase rate.
3、Automatically resetting: after the test begins, measuring system automatically reset to zero.
4、Automatic shifting: automatically changes range when load changes to make sure precise collection of data.
5、Automatic saving: testing data and testing condition are automatically stored to avoid data loss caused by forgetting saving.
6、Batch testing: For specimen with same setting, batch test can be performed after setting the test sequence.
7、Display mode: data and curve are presented while testing.
8、Curve display: after testing, it is possible to revisit the curve to analyze. Move your mouse on the curve to find relative data at each point.
9、Curves: parameters： stress-strain, force-displacement, force-time, displacement-time results are displayed and printable.
10、Parameters: force parameters（g、kg、N、lb）
stress parameters（kg/mm2、N/mm2、Mpa、lbf/in2）
Displacement parameters （m、mm、in）
11、Test report: test reports are edited and printed according to the desired format by client and can be output as Excel files.
12、Safety protection : safety mechanism is triggered when overloading is above 2～10%
13、The tester is able to automatically test and calculate mechanic property of specimen. It is also possible to intervene manually in the analyzing process. Automatic analyzing test results are revised according to relevant standard to improve data accuracy.
4、The standard accessories：
1、load sensor: USA KELI high precision sensor 10kN/1000N. 2 piece
2、testing software: 64bit test board + Chinese and English interface. 1 set
3、motor control:Taiwan Delta B2 servo motor + servo driver 1 set
4、deceleration system: GWD precision reducer 1 set
5、drive rod: Taiwan TBI high-precision ball screw. 2 pieces
6、testing computer: Lenovo business computer M2601C 4g rom+HP's printer 1 set
7、test fixture: customized by client 1 set
8、attached files: machine instructions, verification data, warranty, certificate and packing list for each
5、Standards for this equipment：
1、Tester execution standard: electronic universal tester GB/T 16491-1996, JJG475-2008;
2、General testing standard: GB/T CNS ASTM ISO DIN JIS En.
6、Installing and commissioning：
Information such as foundation drawing, product dimension and weight is provided to client.
7、English Software interface:
Remark：
1、 Invoice: the above quotation includes proforma invoice；
2、 Payment method: payment before delivery；
3、 Delivery time: stock；
4、 Artificial damage, force majeure, pliers are vulnerable parts, are not within the scope of warranty.
5、 ONE YEAR WARRANTY TIME AND LIFETIME MAINTAIN
