Qiantong® Electronic Tape Press Roller with 3 Sets made in China are mainly used in the test of stripping strength and holding viscosity of adhesive tape, protective film and release film products. At a fixed pressure and speed, the adhesive tape sample is standardized flat, uniform stick to the standard test material.
1. Put the steel plate on the Electronic Tape Press Roller with 3 Sets machine from China, stick the tape on one end of the steel plate, and the other end can withstand the fixed edge of the test groove.
2. Turn on the power switch, press the start button, and the press wheel will automatically roll from one end of the tape to the other end at a constant speed.
3. When reaching the other end, the press wheel will automatically return. After the press wheel goes back and forth for three times, it will automatically stop, and then press the reset button to return to zero. Or wait for the pressure wheel, out of the test plate after the press the stop button. One roll back and forth is complete. (The instrument stops three times by default)
4. Repeat the operation as required by the test.
Product Parameter of the Qiantong® Electronic Tape Press Roller with 3 Sets
1. Wheel weight: 2kg;
2. Rolling guide rail: 3
3. Rolling speed: 300mm/min or 600mm/min;
4. Rubber layer hardness: Hs80±5
5. Machine weight: 15KG
6. Power source: 2PH AC220V
7. Design standard: CNS-11888
Product feature and application of the Electronic Tape Press Roller with 3 Sets
The electric rolling roller testing machine is used for the preparation of adhesive strip stripping strength and stickiness test specimens. At a fixed pressure and speed, the adhesive tape sample is standardized flat, uniform stick to the standard test material.
Qiantong® Electronic Tape Press Roller with 3 Sets details
