Plate Vulcanizer Double Layer

Model：QT-8017 Plate Vulcanizer Double Layer

Product picture:(for reference only)

Technical specifications：

1. Nominal clamping force: 0.25MN;

2. Maximum working fluid pressure: 14.0MPa;

3. Maximum stroke of plunger: 250mm;

4. Hot plate area: 350 × 350 (mm);

5. Plunger diameter: φ 152mm;

6. Number of working floors: 2 floors;

7. Hot plate spacing: 125mm;

8. Oil pump motor power: 2.2KW;

9. Single layer hot plate heating power: 2.7KW;

10. Total heating power: 10.3KW;

11. Maximum working temperature of hot plate: 200 ℃;

12. Weight: 650Kg;

13. Heating method: Electric heating.

Machine description:

QT-8017 Plate Vulcanizer Double Layer is suitable for vulcanizing all kinds of rubber, Plastic model products and non model products. It can also be used for pressing test pieces in laboratories and research institutions.

The vulcanization machine structure is a column structure, and the pressing form is a downward pressing type.

This machine is equipped with YCB-25/4 dual pump, which is directly driven by an electric motor. The motor is started with a magnetic starter and is equipped with a thermal relay for overload protection. When the motor is overloaded or encounters a fault, it will automatically stop.

The middle heat plate of this machine is accurately installed in the middle of the four pillars and is equipped with a guide frame. This machine adopts a tubular electric heating element for heating, without the need for a boiler, reducing air pollution, keeping the workshop clean, easy to operate, safe and reliable. It can be used alone, making it convenient for users. This machine is equipped with an oil storage tank in the lower left corner, which contains oil and is used for circulating power to the oil pump. The type of oil used is recommended to use N32 # or N46 # hydraulic oil, which must pass 100 mesh/25 × After filtering with a 25 filter screen, it can be injected into the oil tank. The oil must be kept clean and free from impurities.