Model：QT-6201GS High and low temperature tensile testing machine
Product picture:(for reference only)
Product technical parameters：
1、The machine specification：
The high and low temperature tensile testing machine is used to test the tensile strength, compressive strength, elongation, and elongation of various materials, semi-finished products, and finished products under different temperature environments. Different testing fixtures can be configured to perform tests such as peeling, tearing, bending, bending, and compression. It is suitable for use in industries such as metal, plastic, rubber, textiles, synthetic chemicals, wires and cables, leather, etc;
The tensile testing machine is composed of a main body, a fixture, and a movable high and low temperature test box. The main body of the tensile machine adopts Taiwan AC servo motor and control drive system, combined with Taiwan high-precision gearbox and Taiwan TBI precision ball screw transmission, to achieve the best transmission efficiency and performance to noise ratio; The high and low temperature test chamber adopts a double-layer insulated glass door, which is convenient for users to observe the test situation. It adopts a full stainless steel frame and inner liner, which is not only aesthetically pleasing but also has strong corrosion resistance; The overall design is novel, with high accuracy, low noise, and convenient operation.
2、Technical specifications：
1. Maximum test force: 20KN;
2. Accuracy level of testing machine: 0.5 level;
3. Measurement range of experimental force: 0.2% -100% FS;
4. Relative error of experimental force indication: within ± 1% of the indication value;
5. Resolution of test force: 1/± 300000 of the maximum test force (with no change in resolution throughout the entire process);
6. Relative error of displacement indication: within ± 0.5% of the indication;
7. Displacement resolution: 0.003mm;
8. Force control rate adjustment range: 0.1-5% FS/S;
9. Relative error of force control rate: within ± 1% of the set value;
10. Cross beam speed adjustment range: 0.05-500mm/min;
11. Relative error of beam speed: within 1% of the set value;
12. Control range of constant force, constant deformation, and constant displacement: 0.5% -100% FS;
13. Constant force, constant deformation, and constant displacement control accuracy: When the set value is less than 10% FS, it is within ± 1% of the set value; When the set value is ≥ 10% FS, it is within ± 0.1% of the set value;
14. Maximum stretching stroke: 1200mm;
15. Effective stretching space (net space): 550mm (effective distance between two fixtures);
16. The effective test width is approximately 700 * 700mm (when there is no high or low temperature box);
17. The overall size of the host is approximately (long × wide × Height: 1000 * 800 * 2000mm;
18. Power supply: 220V 50Hz 0.4kW;
19. Main unit weight: approximately 260kg.
3、Technical specifications of high-temperature box :
1. Temperature range: room temperature -40~150 ℃ (excluding humidity);
2. Accuracy: ± 2 ℃;
3. Temperature deviation: ± 2 ℃;
4. Temperature fluctuation: ≤ ± 2 ℃;
5. Temperature gradient: ≤ ± 2.0 ℃;
6. Heating rate: 1-4 ℃/min;
7. Cooling rate: 0.7-1.5 ℃/min;
8. Mobile casters: equipped with mobile casters to facilitate the movement and fixation of the test box;
9. Total power: approximately 2.5KW;
10. Power supply: 220V 50Hz;
11. Stretching space inside the environmental box: 800mm;
12. Effective stretching space inside the environmental box: about 550mm;
13. Space inside the environmental box: 320mm × 320mm × 650mm (width, depth, height);
4、Features of control and data processing system :
1.With advanced chipping technology and professionally designed data gathering and amplifying system，the tester is highly integrated ，reliable and convenient. Control software automatically derives data of tensile strength, yield strength, fracture strength, modulus of elasticity, elongation. The open formula edition function allows automatic calculation of force, tension displacement deformation at any designated point. The standard in the process of control and data processing meet national requirement for testing metallic material and non-metallic material.
2、Control method: fixed speed, fixed displacement, fixed loading, fixed load increasing rate，fixed tension, fixed tension increase rate.
3、Automatically resetting: After the test begins, measuring system automatically reset to zero.
4、Automatic shifting: automatically changes range when load changes to make sure precise collection of data.
5、Automatic saving: testing data and testing condition are automatically stored to avoid data loss caused by forgetting saving.
6、Batch testing: for specimen with same setting, batch test can be performed after setting the test sequence.
7、Display mode: data and curve are presented while testing.
8、Curve display: after testing, it is possible to revisit the curve to analyze. Move your mouse on the curve to find relative data at each point.
9、Curves: parameters：stress-strain, force-displacement, force-time, displacement-time results are displayed and printable.
10、Parameters: force parameters（g、kg、N、lb）
stress parameters（kg/mm2、N/mm2、Mpa、lbf/in2）
Displacement parameters （m、mm、in）
11、Test report: test reports are edited and printed according to the desired format by client and can be output as Excel files.
12、Safety protection : safety mechanism is triggered when overloading is above 2～10%
13、The tester is able to automatically test and calculate mechanic property of specimen. It is also possible to intervene manually in the analyzing process. Automatic analyzing test results are revised according to relevant standard to improve data accuracy.
5、The standard accessories：
1、load sensor: USA Keli high precision sensor 20KN. 1 set
2、testing software: 64bit test board + Chinese and English interface. 1 set
3、motor control: Taiwan Delta B2 servo motor + servo driver 1 set
4、deceleration system: Jiaoxing precision reducer 1 set
5、drive rod: Taiwan TBI high-precision ball screw. 2 pieces
6、testing computer: HP business computer+HP's printer 1 set
7、test fixture: Customize test fixture according to customer sample 1 set
8、attached files: machine instructions, verification data, warranty, certificate and packing list. for each
6、Standards for this equipment：
1、Tester execution standard: electronic universal tester GB/T 16491-1996, JJG475-2008;
2、General testing standard: GB/T CNS ASTM ISO DIN JIS En.
7、Installing and commissioning：
Information such as foundation drawing, product dimension and weight is provided to client.
Remark：
1、 Invoice: proforma invoice；
2、 Payment method: payment before delivery；
3、 Delivery time: stock；
4、 Artificial damage, force majeure, pliers are vulnerable parts, are not within the scope of warranty.
Hot Tags: High and low temperature tensile testing machine, Wholesale, Customized, China, Manufacturers, Suppliers, Factory
Table Type Servo Universal Material Testing Machine
Single Column Universal Material Testing Machine
Engineering Plastics Testing Machine Melt Flow Rate Instrument
Plastic Fiberglass Testing Machine Muffle Furnace
Test Nonmetallic Material Toughness Impact Tester
Vicat Softening Point Temperature Testing Machine
