Metallographic sample grinding and polishing machine is used for grinding and polishing of metallographic samples
1. QT-LP2B Metallographic sample grinding and polishing machine
Features:
1) One machine is used for grinding and polishing of metallographic samples.
2) The speed of the left and right plates is different in one gear and two speeds. The grinding and polishing can be carried out at the same time. The sample preparation can be completed without changing the speed.
3) The rotating water pipe can rotate in the direction of cooling to adjust the water flow.
4) Equipment operation noise is low and grinding plate is flat.
2. Specifications
|
Name |
Parameters |
|
Diameter |
standardφ230mm |
|
speed |
Right: 600r/min left:800r/min |
|
Motor |
0.55kw |
|
Power |
AC380V 50HZ |
|
Shape size |
670×710×340mm |
|
Weight |
46kg |
3. Accessories
|
Name |
Unit |
Name |
Unit |
|
clamping ring |
2 pieces |
Manual |
1 piece |
|
abrasive paper |
10 pieces |
Certification |
1 piece |
|
polishing cloth |
2 pieces |
|
|
|
water inlet |
1 piece |
|
|
|
exhalent siphon |
1 piece |
|
|
Table Type Servo Universal Material Testing Machine
Single Column Universal Material Testing Machine
Engineering Plastics Testing Machine Melt Flow Rate Instrument
Plastic Fiberglass Testing Machine Muffle Furnace
Test Nonmetallic Material Toughness Impact Tester
Vicat Softening Point Temperature Testing Machine
