Halogen moisture analyzer meter

QT-720A Halogen moisture analyzer meter

Product picture：（Picture is for reference only）

Introduction of instruments：

Moisture meter is a high-precision sensor and high-efficiency secondary thermal radiation device equipped on the basis of electronic balance. It can measure moisture quickly and accurately.

The moisture analyzer stores all kinds of water determination methods of different samples in advance, which makes the testing work fast and simple. Compared with mechanical products, the efficiency and accuracy of measurement results are multiplied. The general sample can be completed in a few minutes. The instrument is simple to operate, accurate to test, display part of the display value is clearly visible, respectively, can display water value, sample initial value, final value, determination time, temperature and other data. And it has the function of connecting with computers and printers. The moisture meter can be widely used in all industries requiring rapid determination of moisture to meet the application requirements of various industries, such as plastics, rubber, chemical, pharmaceutical, food, and other industries in the production and experimental process.

Technical specifications：

1、 Capacity：120g；

2、 Division：0.001g；

3、 Readability：0.01%；

4、 The weighing sensor：German HBM sensor；

5、 processor：U.K ARM；

6、 Heating source：Halogen lamp；

7、 Drying method：Automatic, manual and timing selectable；

8、 Heating mode：Standard, fast and timing optional；

9、 Downtime：Automatic shutdown, time downtime and manual shutdown；

10、 Temperature setting：RT-180℃；

11、 Test data display：Weight, dry weight, moisture content, solid content,temperature and test time before drying；

12、 Data preservation：16 sets of testing methods；

13、 balancing weight：100g；

14、 Disk size：φ110mm；

15、 communication interface：Standardized RS232 Communication Interface - Easy to connect printers, computers and other peripherals to meet FDA/HACCP format requirements；

16、 Shape size（L×W×H）：330*205*165(mm)；

17、 Packing size（L×W×H）：410*315*335 (mm)；

18、 Power Supply：220V ；

19、 Host weight：4.6kg .

Characteristic：

1、No need to install and debug, unpacking can be used；

2、No training, simple operation, and cumbersome use steps；

3、The determination time is short and the working efficiency is high；

4、Uniform heating, stable performance and accurate testing；

5、Small size and light weight；

6、Automatic measurement, alarm after measurement, no need to take care of the process；

7、It is widely used and is suitable for measuring moisture content in various industries；

8、Germany imported sensors make the instrument test more excellent and precise；

9、The unique wind shield design makes the weighing system more stable；

10、The water content and solid content of the sample can be converted simultaneously；

11、The heating chamber adopts pure stainless steel cavity cover with high temperature resistant and easy to clean.

Testing procedure:

1. In the state of 0.00, placed the sample on the scale.

2. Cover the lid and press the Start to start the heating test.

3. After testing, the screen directly displays the moisture content of the product. Press Set to switch the moisture content, solid content, water loss weight, and then press Start to return to the next sample test.